Aluminium Fork Vice Jaws
Aluminium Fork Vice Jaws
| In-Store Stock |
Not Available
|
| Online Stock |
Available
|
SHIPPING
SHIPPING
Orders can be shipped from either Auckland, Hamilton, Tauranga, New Plymouth, Wellington or Christchurch warehouses. Depending on the location of items you have ordered, DR MOTO will ship your purchase from the closest location where possible.
New Zealand
Free shipping on orders over $149.00 - Excludes Motorcycles, ATV's , Electric Bikes and dangerous goods.
For orders under $149.00, shipping throughout New Zealand is $10 for Urban and $14 for Rural.
In most cases shipping is overnight however it can take 2-3 days depending on time/day the order was placed. If delivery is to a rural address please allow a couple of extra days. We can ship to your place of work!
RETURNS
RETURNS
**Please choose carefully - no refunds or exchanges on clearance or discounted items**
If you are unsure about fitment or sizing, please contact us first.
Any goods purchased from DR MOTO can be returned within 14 days of receipt for refund or exchange.
The goods must be returned new, unused, unaltered, not previously installed, and in a sellable condition with all of the original packaging.
This right of return will not cover items that are special orders and found to be an incorrect fit, this is the responsibility of the purchaser, however all other standard warranties will apply.
Freight costs will not be refunded.
Please refer to our returns policy for full terms & conditions.
FITMENT GUIDE
FITMENT GUIDE
For direct bike fitment please use our SEEKER PARTS FINDER
For clothing fitment and product information guide CLICK HERE
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Aluminium Fork Vice Jaws
VICE MOUNTED ALLOY FORK CLAMPS DIAM. 35 TO DIAM. 60 mm
These clamps are made from aluminium slightly softer than the outer fork tubes on motorcycles so as not to mark the anodising finish.
They are designed to be bolted to the jaws of 150 mm width vices that have removable jaw plates. They can also be fitted to 125 mm width vices.
To install, carefully ascertain the precise bolt centres on your vice and drill matching holes in jaws at a suitable height for your vice. The original removable jaw plates from the vice can be used as a template for drilling the holes in the alloy jaws. You will need to purchase two longer bolts, matching the diameter and thread pitch of the vice jaw mounting holes.
The clamps can be fitted protruding from the left, or the right of the vice. Just turn them over depending on which end of the bench the vice is mounted on. The blank end of the jaws should ideally be fitted flush with one end of the vice. However, vice shanks vary in width, so you will need to ascertain that the complete diameter of the fork leg will clear the vice shank while the fork is clamped in the centre of the V section of the jaw. At the same time, ensure the new aluminium jaws have as much support as possible behind them.
Do not overtighten this clamp. It is possible to bend the alloy jaw and to distort the alloy fork housing.
Always loosen the top fork nut whilst the fork is still clamped in the yokes.
Final tightening of the top nut should be done after the forks are reassembled in the bike and both yokes tightened to factory torque settings.
